Performance Boats Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
526 Posts
Discussion Starter #1
My problem, getting very little oil up the push rods to the roller rockers and onto the valve's, So the question is
on a solid lifters, how does the oil get up to the valve's, if the cup on the lifters are solid and the push rods sit in that cup how does it work..
Thanks.....
 

·
steelcomp was here
Joined
·
26,527 Posts
My problem, getting very little oil up the push rods to the roller rockers and onto the valve's, So the question is
on a solid lifters, how does the oil get up to the valve's, if the cup on the lifters are solid and the push rods sit in that cup how does it work..
Thanks.....
What engine are we talking about? If the lifters have a solid cup, there's no oil going up the pushrod. Some engines are designed this way.
 
1 - 3 of 3 Posts
Top