Performance Boats Forum banner
1 - 8 of 8 Posts

·
21 Daytona
Joined
·
5,291 Posts
Discussion Starter · #1 ·
Kjell how many qts of oil did you run in that Stefs Pan?
I'm bolting it up and figured I would mark the dipstick where you used to run it. Should be a good starting point.


Paul
 

·
Registered
Joined
·
988 Posts
I Ran A Milodon Pan And Had Oil Psi Issues. Now Im Running A Pan From Jet Boat Performance. No Oil Psi Issues. But When I Run 10qts, My Motor Makes A Mess. If I Run 8-9qts In A 10QT Pan Im Good To Go. No Oil Spray.
 

·
21 Daytona
Joined
·
5,291 Posts
Discussion Starter · #5 ·
Run 7 quarts in the pan. 1 in the filter. Does this mean you're getting close to firing it?:)
Thanks....Means the engine is DONE:)devil Talking with my EFI guy about putting it on a dyno:)bulb


WOT specs show 9 qt pan, but Widowmaker has ran this pan on a dyno
and in his boat so I figured he had a good idea where it worked best:D
 
1 - 8 of 8 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top