[vintagespeed]

i dont see any cracks on either, but i do see some dings and scrapes on the blades of the impeller (probably hard to see in these pics).

the bowl has the same sort of damage, nothing bent just dings & scratches.

is this okay to run as is in a family thrasher boat? it's not ever gonna see 60+ on a gps...

the pump turns freely and doesn't have any play in the bearings.

just wanna know if it's worth my time to repair/replace this setup? thanks!

 

[sleekcrafter]

Looks to have seen some better days, here is a great guide to the working of a jet pump. The impeller needs a little attention, give this a look, you will figure out what you need to do.

http://www.americanturbine.com/downloads/pdf/oh_manuals/berk_oh_manual.pdf

 

[Brendellajet]

It might cavitate a little, but it will run. Might be a good idea to measure the wear ring clearance if you can get to it, too.