Performance Boats Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
10 Posts
I have a set of GM performance products bowtie heads 315cc intake runners with 2.25 intake and 1.88 exhaust valves fresh from the machine shop with valve job and surfacing set up for a solid cam ready to bolt on Brian (562)413-4910
 

·
Registered
Joined
·
321 Posts
I have a set of canfield 320's with about 20 passes on them since their last freshen up. Assembeled, springs for solid flat tappet. I would have to get $2000 to break even, let me know if you are interested, located in Lodi/Stockton area.
 

·
Registered
Joined
·
950 Posts
I have a set of GM performance products bowtie heads 315cc intake runners with 2.25 intake and 1.88 exhaust valves fresh from the machine shop with valve job and surfacing set up for a solid cam ready to bolt on Brian (562)413-4910
Do you have any flow numbers from these heads?
 

·
Registered
Joined
·
441 Posts
I have a set of heads fresh from the machine shop, zero run time. $1500. They're winters
 
1 - 6 of 6 Posts
Top