Performance Boats Forum banner

1 - 12 of 12 Posts

·
Registered
Joined
·
26 Posts
Originally Posted by byers flat
11 Files View Slideshow Download All
DSC03198.jpg (65KB); DSC03199.jpg (51KB); DSC03200.jpg (51KB); DSC03201.jpg (62KB); DSC03202.jpg (62KB); DSC03203.jpg (59KB); DSC03204.jpg (61KB); DSC03205.jpg (48KB); DSC03206.jpg (59KB); DSC03207.jpg (53KB); DSC03208.jpg (68KB)



As you can see by the second picture the tubes that you can see are not to bad, but the undersides where it was hard to get to are not great. It appears to be surface rust only and not structual. The inside of the tube appear to be solid also.

I was thinking about $250 for them.

If the pictures do not open send me a e-mail out side of this forum [email protected] and I will send them to you again.

If you have any questions e-mail me or call at 909-520-2280


Thanks Wayne


I have a set. Did you get the e-mail that I sent you with pictures

Thanks Wayne

Originally Posted by byers flat
11 Files View Slideshow Download All
DSC03198.jpg (65KB); DSC03199.jpg (51KB); DSC03200.jpg (51KB); DSC03201.jpg (62KB); DSC03202.jpg (62KB); DSC03203.jpg (59KB); DSC03204.jpg (61KB); DSC03205.jpg (48KB); DSC03206.jpg (59KB); DSC03207.jpg (53KB); DSC03208.jpg (68KB)



As you can see by the second picture the tubes that you can see are not to bad, but the undersides where it was hard to get to are not great. It appears to be surface rust only and not structual. The inside of the tube appear to be solid also.

I was thinking about $250 for them.

If the pictures do not open send me a e-mail out side of this forum [email protected] and I will send them to you again.

If you have any questions e-mail me or call at 909-520-2280


Thanks Wayne
 
1 - 12 of 12 Posts
Top