Performance Boats Forum banner

Status
Not open for further replies.
1 - 8 of 8 Posts

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #1 (Edited)
WTB Oval port BBC heads & Intake,Selling pair of 990 heads & Rec port Polished Intake

I have a pair of heads on a 468 bbc Engine i have.. they are 990 GM rectangle port heads.. i will be keeping the springs and retainers for the new heads since the springs match my cam.. the heads are in good shape but do need a couple heli-coils on the Intake side of manifold.. they are on a running engine... Heads with Valves 400.00 plus shipping.. comes with Valves no other hardware..

i also have the Intake im going to swap out for Oval port heads/intake.. it is a Weiand single plane looks to be a Street Warrior intake that is Polished

Polished Weiand Street Warrior Intake is super nice.. Un Polished these are 269 and up.. 200.00 plus shipping..

looking for a set of possibly 049 oval port or a cheap pair of Aluminum Oval port heads.. also looking for a Good oval port intake manifold.. This is a Short deck BBC .. let me know what you have ..

That is actual picture of the engine in the boat.. Boat is not set up for higher RPM's and want to swap to Oval port is all

Located near Sacramento Ca. 530-333-1047 Bill
 

Attachments

·
Registered
Joined
·
34 Posts
I have a set of new Edelbrock oval port aluminum heads set up for hyd roller. brand new in the box. $1800 shipped. Mike 949-690-4995 text is best
 

·
Registered
Joined
·
2 Posts
Heads

I have a pair of Chev oval port closed chamber, don't know the numbers right now. They are not 049's as those were open chamber. Also a Weiand Team G oval port to match. Yes they are oval port not peanut ports. FC Pilot on the boards here knows this set up, it came off a running engine. I'm having my college students freshen up the valve faces and seats for practice. If you maybe interested PM. This is a spare set up, and I really don't care if they go or not.

STEVE
 

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #4
I have a set of new Edelbrock oval port aluminum heads set up for hyd roller. brand new in the box. $1800 shipped. Mike 949-690-4995 text is best

thanks i'm trying to do this on a Budget and not spend a lot on Heads. if i go new i will go with the China made aluminum heads since they redesigned them much better quality now and only 900 for a pair.. can't afford that money on something i may not keep more then a year or 2.. Nice heads tho :)..
 

·
V-Drive 4 ever
Joined
·
1,810 Posts
Discussion Starter #5
I have a pair of Chev oval port closed chamber, don't know the numbers right now. They are not 049's as those were open chamber. Also a Weiand Team G oval port to match. Yes they are oval port not peanut ports. FC Pilot on the boards here knows this set up, it came off a running engine. I'm having my college students freshen up the valve faces and seats for practice. If you maybe interested PM. This is a spare set up, and I really don't care if they go or not.

STEVE
thanks , i need Open chamber since im already at 10to1 with Open chambers.. Closed would put me too hi of compression for pump gas.. Willing to sell the Intake tho? if so how much.. thanks , Bill
 
1 - 8 of 8 Posts
Status
Not open for further replies.
Top