automotive gaskets, didnt know they have marine gaskets, I like the rubber gaskets, in most spots, they are re-useable.

 

According to jegs, they offer a gasket set for a marine application. What it consists of is by me

 

Is there a price difference? Unless u need special intake gaskets or something, I would go down to the local auto parts store and pick up a gasket set.

 

milkshake sludge on the bottom of my intake manifold

some times that can just be codensation after sitting for a long time

 

There's a big price difference between marine and automotive. I may go the automotive route.

As for the condensation, I wish it was just that but it's for sure too much water pressure going into my engine

 

don't cheap out on the head gaskets, get good ones

 

X's 2 if you want a premium Head gasket check these out ...Cometic Gasket, Inc.

 

fel pro blue gasket and a thin coat of copper coat spray on both sides, will never leak

 

x2 coppercoat is your friend

 

... The big question is running automotive gaskets going to cause me the same problem? ...

The biggest diffence between stock automotive gaskets and marine gaskets is the material - steel vs stainless. (Hi performance stuff is often stainless) This is very important to people boating in SALT water. I worked at a marina in my college years - often a customer would assemble an SBC with stock auto replacement gaskets. Before the season was done the steel combustion rings would rust out and water would poor into the cylinder.

Since you are not boating is salt water don't sweat the marine vs auto. Just buy quality.

Doug